Used Fence material  

I have some used fence material that I took down recently
(came with the house... previous owners had dogs...)
The material is in good condition.  

The fence is mostly about 6' high and has an unfinished
weathered wood look.

The posts are about 5 inches square,  made of pressure-treated
wood, and have no rot.  The posts have kind of a teardrop ornament
at the top:  (best viewed with a fixed width font)


        /\
       /  \
      (    )
       \  /
       -  - ----______                  ______----
      |    |           ------------------
      |    |



Each of the panels has a scalloped top profile so that the
middle of the panel is a little lower than the ends.

The panels have verticle boards fitted together with
no gap that are fastened to two horizontal members.

The panels engage the posts by way of cylindrical plugs
at the ends of the horizontal members that fit into sockets 
in the posts.

The pieces did fit together into a single run that includes
one 90 degree turn and a 135 degree turn, but it would not
be difficult to change this configuration...

summary of posts:

quantity  approximate length        

1         5' 2"
1         5' 6"
2         6' 3"
1         6' 5"
1         7'
2         7' 9"
2         8' 4"
2         8' 7"
2         9' 2"
1         10'       

Summary of panels:


quantity   height  width

5          6'      8'
3          6'      10'
1          3' 6"   8'
2          3' 6"   10'

1 10? foot wide panel that is 6' hi on one and and 3' 6" on the
other end.


The fencing is located in Cambridge, MA


reply to sw@ai.mit.edu or call 617 497 0981 


William (Sandy) Wells